Note: The image serves as a mere representation. The final product may vary due to bulk production.

• Case (Knob+ movement +internal Weight + Daughterboard)
• Default Dampening Foam Kit (Cork Edition)
• 1.6mm Tri-mode RGB PCB (Non-flex cut)
• Default Alu plate
• Storage Case
• 2.4GHz Receiver
• USB-C Cable
• Battery 
• Rubber Feet

Disclaimer

Since there are so many variations, many of the images provided on the product page are renders and are for display purposes only. The renders are given to provide an idea to what the final product will look like. The physical product may have some differences. Please also refer to the prototype photos as reference before purchasing.

Shipping Insurance

Considering the cost of the board, we highly recommend customers to opt in for signature confirmation or Shiptection Shipping protection for just 1% of the order total. We'll not be responsible for lost or stolen orders after tracking has marked it delivered.

Note on Flywheel & Tourbillon

This manual movement should be wound a maximum of 30 turns, providing approximately 1–2 days of power reserve. Do not exceed the recommended turns, as overwinding after the mainspring is fully tensioned may cause it to slip.

Please see the FAQ section above for more info.

Acceptable Quality Standards

Quality Standards Document 🔗

Please read this document to see what type of quality control standards will apply to NAMA

1. Does the NAMA Standard Edition include switches and keycaps?

No, the NAMA Standard Edition does not include switches or keycaps. This allows you the freedom to personally select and purchase your preferred switches and keycaps to create a keyboard that is uniquely tailored to your style.

2. What is the difference between the NAMA Standard Edition and the Bespoke Edition?

The NAMA Standard Edition comes in a fixed configuration for the top and bottom cases, though the movement edition is selectable. It does not include switches and keycaps.

The NAMA Bespoke Edition offers full customization, allowing you to choose the top case, bottom case, movement edition, plate, sound-dampening foam kit, as well as select switches and keycaps from our website for a complete, Pre-built keyboard.

3. Is the NAMA knob removable?

Please Note : To protect your warranty, the knob on the NAMA keyboard is removable, but its core movement is permanently sealed and is not meant to be disassembled. Any damage caused by tampering with the movement will not be covered under our after-sales service.

4. What is the NAMA RGB lighting effect like?

The NAMA keyboard features south-facing RGB LEDs. For a detailed visual demonstration of the lighting effects, please check this above

5. Is the NAMA keyboard pre-built?

The NAMA Standard Kit is partially pre-assembled. You will only need to install your chosen switches and keycaps

The NAMA Custom Kit arrives as a complete, fully assembled unit, including your selected switches and keycaps.

6. How do you operate the standard flywheel and tourbillon, and what precautions should you take?

Movement instructions: This manual movement should be wound a maximum of 30 turns, providing approximately 1–2 days of power reserve.
Note: Do not exceed the recommended turns, as overwinding after the mainspring is fully tensioned may cause it to slip.

How to Identify Full Wind: Through the transparent case back, observe the tightness of the mainspring inside the barrel. When the coils appear fully compacted, the movement is fully wound, and winding should be stopped immediately.

7. Where is the NAMA movement made？

Shanghai Movement Factory, a very reputable and reliable movement manufacturer in China, representing China's top-level movement manufacturing