GMK Devoted - Themed Switches and Stabilizers
The Switches are 63.5 gram tactiles that have a tactile stem closer to that of a Cherry Clear. Less aggressive in terms of its tactility which is a welcome breath of fresh air in the current switch design landscape.
These stabilizers were designed to minimize the rattle as much as possible. The wires clip into the housing and fit into the sliders very snugly. As a result the wires are also less prone to popping out when changing keycaps.
Nylon top and bottom housing
In Switch LED Slot
Each Stabiliser kit comes with
Both 6.25u and 7u
Gold Plated Wire
These are PCB mounted stabilisers
GB End - 3 March
Estimate Shipping - Q2 2021
Instructions for attaching screw-in stabilisers
1. Slide the feet into the big stabiliser holes on the PCB
2. Press the back of the feet into the smaller holes
3. Flip over PCB and screw in screws, repeat for other side of stabiliser
- Can I combine a Group Buy's matching deskmat with the keyset in my order?
Unfortunately no. There was a time where orders allowed to add deskmats and keysets together but due to the nature of production -deskmats often come many months before the keysets arrive. There is simply not enough space to store deskmats for months at at time.
This may change in the future, and some sets may allow it depending on manufacturing timelines for both the keysets and deskmats.
The sample deskmat in the photo differs slightly from the production units. The image is the best representation of what the final product will look like. Because of the printing method used, there is a possibility of a slight difference in color between units in the same batch. By purchasing this product, you are accepting this risk.